Waldorf QUANTUM, User Manual

Page: 111 / 231

Sound Parameter
111 Quantum Manual
Shape
See corresponding description in the ‘LFO Panel Parame-
ters’ chapter.
Tap on Shape to open a pop-up menu for further settings:
•
Set Default : sets Shape to its default Sine setting.
•
Set Last Loaded : resets the parameter to the last
loaded value from the current sound patch.
•
MIDI Learn CC : activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Speed / Speed Ratio
See corresponding description in the ‘LFO Panel Parame-
ters’ chapter.
Tap on Speed to open a pop-up menu for further settings:
•
Normal : Speed change is about 2.8 Hz.
•
Fine : Speed change is about 0.28 Hz.
•
Super Fine : Speed change is about 0.028 Hz.
•
Set Default : sets Speed to its default value of 6.25 Hz .
•
Set Last Loaded : resets the parameter to the last
loaded value from the current sound patch.
•
Modulations : opens the Mod menu to sets up a modu-
lation for this parameter. More information can be
found in ‘The Modulation Mode’ chapter.
•
MIDI Learn CC : activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Warp
Depending on the selected LFO Shape , the Warp parame-
ter folds the corresponding waveform. Here are the results
for the different LFO waveforms:
•
If Sine is selected, positive or negative values compress
the upper or lower phase of the waveform.
•
If Triangle is selected, higher values turn the wave
into a rising sawtooth wave while lower values create a
falling sawtooth wave.
•
If Square is selected, Warp changes the pulsewidth of
the waveform.
•
If Saw (down or up) is selected, the waveform is
folded. Settings below 0.00% also reduce the LFO phase
from bipolar to unipolar.
•
If S&H (Sample & Hold) is selected, Warp shapes the
edges of the held waveform and smooths it.