Additional Modes
155
Quantum Manual
•
Set Last Loaded
: resets the parameter to the last
loaded value from the current sound patch.
•
Modulations
: opens the
Mod
menu to sets up a modu-
lation for this parameter. More information can be
found in ‘The Modulation Mode’ chapter.
•
MIDI Learn CC
: activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
The Step Sequencer
The
Autoplay
tab also contains a programmable step
sequencer, where you can use up to 32 steps per measure.
For each step the note length, velocity, and pitch can be
defined. You can also create four additional controller
sequences that can be used as modulation sources.
To enter the Step sequencer, tap on the
Mode
button and
select
Sequencer
.
r
The sequencer outputs MIDI notes if the MIDI Out
function on the
Global
menu page is enabled.
=
To start the sequencer playback, tap on the
Off
button
(it switches to Running) and play one or more notes
on the keyboard. You can also press the
Arp
button in
the
Wheel
section to start the sequencer.
The Sequencer Representation
The display gives you an overview of all steps of a se-
quence. You can edit this graphic directly using the follo-
wing tools:
•
Each block in the center of the graphic represents a
step. The number of blocks depends on the setting of
Summary of Contents for QUANTUM
Page 1: ...USER MANUAL...