
Additional Modes
160
Quantum Manual
r
When
Mod Targets
mode is active, no step edits can
be made. This page is for modulation set ups only.
The Parameter Sequencer with Mod Targets
You can set up a modulation routing very easily:
•
Tap on
Add
to add a modulation routing. Up to 40
routings are possible.
•
With
Destination
, you can select a desired modulation
target.
•
Amount
determines the modulation intensity. This can
be adjusted positive or negative.
•
You can also add a
Controller
with a
Control Amount
to a modulation assignment.
•
Tap on the
Clear Selected
button to delete the selected
modulation assignment.
Clear All
: tap on this button to
delete all modulation assignments that are shown in
this list.
•
To end the Mod Targets mode, tap on the
Mod Targets
button.
r
Read more about modulation assignments in the
chapter 'Modulations of Quantum'.
The Pad Trigger Mode
Tap on the
Mode
button and select
Pad Trigger
to switch
to the corresponding display page.
In this mode the 4x4 pads in the display will be sequential-
ly run through based on the direction given by the
Algo-
rithm
parameter. The pitches of each pad and therefore of
the sequenced steps will be taken from either the
Notes
,
Scale
or
Chords
pitch configurations of the pads. Tap on
the respective tab button for setting up these pitches.
Summary of Contents for QUANTUM
Page 1: ...USER MANUAL...