Additional Modes
185
Quantum Manual
If you want to record an external audio signal, first make
sure to connect a suitable signal source to the Quantum´s
audio inputs:
1)
Turn the
Rec. Source
display dial and select
In-
put
.
2)
With
Rec. Level
you set the recording level. Make
sure that you do not drive the incoming signal in-
to saturation.
3)
With
Monitor Level
you can monitor the inco-
ming audio signal. In the lower left area of the
touchsecreen display, the recorded signal will be
shown in the
Input
meters.
4)
Set the recording
Trigger
:
Manual
means that
you have to start the recording manually. With
Note
, the recording starts after hitting a key. With
Signal
,
the recording starts after an audio signal
occurs on the selected
Rec. Source
input. In all
cases, you need to tap on the
Record
button first.
5)
Tap on
Stop
to end the recording process.
Sample Editing
You can make some basic sample edits to adapt the sample
to your needs.
•
Tap on
Select
to select (
All
) or deselect (
None
) the
recorded sample.
•
You can also move your finger to make a sample selec-
tion.
Tap on the
Zoom
button to open a pop-up menu with
different zoom options:
•
Zoom In
/
Zoom Out
: lets you zoom the sample wave-
form representation in and out.
•
Zoom All
: zooms to an overall representation of the
complete sample waveform.
•
Selection:
displays the section of the sample that has
been selected. To define a sample area, draw a selec-
tion with your finger. The area is shown in yellow. You
can move the area by holding and moving.
•
Sel. Start
/
Sel. End
: displays the sample selection
start/end for a detailed overview.
Tap on the
Edit
button to open a pop-up menu with diffe-
rent sample selection edit options:
Summary of Contents for QUANTUM
Page 1: ...USER MANUAL...
