Waldorf QUANTUM, User Manual

Page: 91 / 231

Sound Parameter
91 Quantum Manual
Tap on State to open a pop-up menu for selection.
•
Set Default : sets State to its default setting Active.
•
Set Last Loaded : resets the parameter to the last
loaded value from the current sound patch.
•
MIDI Learn CC : activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Env Button
Tap on this button to switch the Envelope mode on or off.
If inactive (button is greyed out), Filter Level and Filter
Pan can be controlled by the right display parameter dials.
If active (button lit and a small filter envelope graphic is
shown), Filter Envelope Amount and Filter Velocity
Amount can be controlled by the right display parameter
dials.
Tools Button
Tap on the Tools button to open a pop-up menu for
selecting the following filter screen options:
•
Show/Hide Analyzer : Activates/deactivates a real-
time graphic spectrum analyzer that is shown as an
overlay. Keep in mind, that the analyzer curve displays
the filtered audio signal.
•
Animate/Hide Mods : Animates the filter curve when a
modulation (e.g. via LFO) is set up.
•
Switch Digital/Analog : Deactivates the Analog Filter
section and replace it with two digital filter modelst
that can also be found in the Iridium synthesizers.
When set to Digital, the Stereo Mode parameter is re-
placed by a Filter Mode option which offers the follo-
wing types:
•
SVF : offers a filter type with a state variable filter
characteristic.
•
Raiser : raises the slope when you add resonance.
The sonic effect is that by adding resonance the
filter sounds more aggressive esp. in ‘dirty’ mode.
•
Largo : offers a filter type with Waldorf Largo
synthesizer characteristic.
•
Nave : offers a filter type with Waldorf Nave
synthesizer characteristic.
•
PPG : offers a filter type with Waldorf PPG Wave
3.V synthesizer characteristic.
•
Quantum : offers a filter type with Waldorf
Quantum synthesizer characteristic.