Waldorf QUANTUM, User Manual

Page: 48 / 231

Sound Parameter
48 Quantum Manual
•
Super Fine : Detune change is about 0.003 cents.
•
Set Default : sets Detune to its default value 0.0 %
cents.
•
Set Last Loaded : resets the parameter to the last
loaded value from the current sound patch.
•
Modulations : opens the Mod menu to sets up a modu-
lation for this parameter. How to set up a modulation
can be read in ‘The Modulation Mode’
chapter.
•
MIDI Learn CC : activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Warp
Same functionality as for the corresponding panel parame-
ter.
Tap on Warp to open a pop-up menu for further settings:
•
Normal : Warp position change is about 1 %.
•
Fine : Warp position change is about 0.1 %.
•
Super Fine : Warp position change is about 0.01 %.
•
Set Default : Warp position is set to its default value of
50.0 %.
•
Set Last Loaded : resets the parameter to the last
loaded value from the current sound patch.
•
Modulations : opens the Mod menu to sets up a modu-
lation for this parameter. More information can be
found in ‘The Modulation Mode’
chapter.
•
MIDI Learn CC : activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Stereo
When Count is set to any kernel value higher than 1.0, this
parameter determines the stereo panning for every played
oscillator kernel signal. In
Center setting, all oscillators are
played on both stereo channels. Higher settings move the
signals within the stereo field.
Tap on Stereo to open a pop-up menu for further settings:
•
Normal : Stereo change is about 2 degree.
•
Fine : Stereo change is about 1 degree.
•
Super Fine : Stereo change is about 0.1 degree.
•
Set Default : sets Stereo to its default value of 0.0 %.
•
Set Last Loaded : resets the parameter to the last
loaded value from the current sound patch.