
Sound Parameter
147
Quantum Manual
•
Set Last Loaded
: resets the parameter to the last
loaded value from the current sound patch.
•
MIDI Learn CC
: activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Amount
Determines the amount of modulation applied to the des-
tination. Since the modulation is, in fact, a multiplication of
the source signal and this parameter, the resulting
amplitude depends on the type of modulation source you
select:
•
For so-called unipolar modulation sources the resul-
ting amplitude lies within the range of 0…+1 – if
Amount
is positive or 0…-1 – if
Amount
is negative.
These sources are: all envelopes; all MIDI controllers
including Mod Wheel, Pedal, etc; Velocity; Release Ve-
locity; Aftertouch (Pressure; and Polyphonic Pressure).
•
For so-called bipolar modulation sources the resulting
amplitude lies within the range of -1…0…+1. These
sources are: all LFOs, Keytrack, and Pitchbend.
Tap on
Amount
to open a pop-up menu for further set-
tings:
•
Normal
: parameter change is about 2%.
•
Fine
: parameter change is about 0.2%.
•
Super Fine
: parameter change is about 0.02%.
•
Set Default
: sets the parameter to its default value of
+0.0%.
•
Set Last Loaded
: resets the parameter to the last
loaded value from the current sound patch.
•
MIDI Learn CC
: activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Destination
Defines the modulation destination.
Tap on
Destination
to open a pop-up menu for further
settings:
•
Set Default
: sets the parameter to its default
Off
set-
ting.
•
Set Last Loaded
: resets the parameter to the last
loaded value from the current sound patch.
•
MIDI Learn CC
: activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Summary of Contents for QUANTUM
Page 1: ...USER MANUAL...