Sound Parameter
129
Quantum Manual
Speed
If
Sync
is deactivated, the modulation speed can be set
freely in Hertz. If
Sync
is activated, the parameter name is
called Sync Ratio and allows you to specify the base note
value for tempo-syncing the effect (from 1024 beats to
1/32, straight, triplet, or dotted).
LR Phase Diff
Sets the phase offset of the modulation LFO between the
left and right audio channels. Higher values lead to a wider
stereo range.
Shape
Determines the shape of the LFO waveform, which is used
for the tremolo modulation. You can select between a sine,
a triangle and a square waveform.
Smooth
Determines the slew rate of the selected LFO waveform.
The higher the setting, the smoother the slew rate.
Sync
Synchronizes the delay to the internal tempo of the Quan-
tum. If activated, you can set up
Sync Ration
in musical
values.
Phaser
Phase shifting is a sweeping effect that was first popula-
rized in the 1960s. It adds motion and a swirling character
to the sound. It works by splitting the incoming signal,
changing the phase of one side, and recombining it with
the unaffected signal. This creates a notch-comb filter that
can be swept through the frequency spectrum, causing the
signature ‘whooshing’ sound of the phase shifter. The
sweep is caused when the phase of the affected half is
modulated by an LFO, with the frequency determined by
Speed. Depth sets the amplitude for the action of the fil-
tering, while Feedback amplifies certain harmonics.
Summary of Contents for QUANTUM
Page 1: ...USER MANUAL...
