Additional Modes
188
Quantum Manual
Quantum supports an optional second MPE zone; channel
ranges can be configured with the
Channel
button (when
MPE is set to active) or set automatically from MCM mes-
sages. To use dual MPE zones it is recommended to choose
the “Split” layer mode.
Outputs
Here you can make settings relating to the MIDI outputs
(DIN Out, USB Controller Out, USB Computer Out).
•
State
: Tap on this button to switch the corresponding
MIDI Out on or off. Keep in mind that the arpeggiator
and the step Sequencer will send MIDI notes for enab-
led MIDI outputs.
•
Chan 1 / 2
: here you can determine the MIDI channel
for Layer 1 and 2, on which MIDI data is sent out.
•
Send CC
: here you can activate all mapped MIDI Con-
trol Change (MIDI CC) data being sent out for the panel
pots, buttons, and encoder.
•
NRPN
: ff set to
On
, the physical panel elements send
out MIDI NRPN data. For parameter automation please
use MIDI CC as before. Keep in mind, that the Quantum
doesn´t react on incoming NRPN MIDI data.
r
If you have a MIDI hardware controller routed in
both directions, you could use your DAW automati-
on function to easily control the Quantum parame-
ters.
Summary of Contents for QUANTUM
Page 1: ...USER MANUAL...
