Additional Modes
169
Quantum Manual
•
Modulations
: opens the
Mod
menu to sets up a modu-
lation for this parameter. More information can be
found in ‘The Modulation Mode’ chapter.
•
MIDI Learn CC
: activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Pan (Panning)
Here you determine the panning of the selected layer.
Tap on
Pan
to open a pop-up menu for further settings:
•
Normal
: panning change is about 2%.
•
Fine
: panning change is about 0.2%.
•
Super Fine
: panning change is about 0.02%.
•
Set Default
: sets panning to its default
Center
value.
•
Set Last Loaded
: resets the parameter to the last
loaded value from the current sound patch.
•
Modulations
: opens the
Mod
menu to sets up a modu-
lation for this parameter. More information can be
found in ‘The Modulation Mode’ chapter.
•
MIDI Learn CC
: activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Gain
Here you determine the gain for an external signal. Make
sure to adapt the overall level of an external audio signal
by using
Input Volume
in conjunction with
Gain
.
Tap on
Gain
to open a pop-up menu for further settings:
•
Normal
: Gain changes with normal values.
•
Fine
: Gain changes with fine values.
•
Super Fine
: Gain changes with super fine values.
•
Set Default
: sets Gain to its default value of
0.0dB
.
•
Set Last Loaded
: resets the parameter to the last
loaded value from the current sound patch.
•
MIDI Learn CC
: activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Send Main
Determines if the currently selected Layer sound is sent to
the Quantum’s Main outputs (
On
) or not (
Off
). If the Output
Routing on the Global -> Settings -> Audio display page is
set to
Global
, this parameter globally assigns each layer to
certain outputs independend of patch settings and keep
this constant.
Summary of Contents for QUANTUM
Page 1: ...USER MANUAL...
