Sound Parameter
84
Quantum Manual
cussion-like electronic toms, kicks, zaps, etc. The functio-
nality of these knobs depends on the
Mode
setting.
Type
Selects the filter slope for the lowpass filter (LP):
•
12dB LP
removes frequencies above the cutoff point
with a 12dB slope. The oscillator signal need to be sent
to a DA converter before passing the analog filter cir-
cuitry. The necessary signal adaption is done by a soft
limiter. This leads to a neutral audio signal.
•
12dB sat. LP
removes frequencies above the cutoff
point with a 12dB slope. The oscillator signal need to
be sent to a DA converter before passing the analog fil-
ter circuitry. The necessary signal adaption is done by
a saturation stage. This leads to a light driven audio
signal.
•
12dB dirty LP
removes frequencies above the cutoff
point with a 12dB slope. The oscillator signal need to
be sent to a DA converter before passing the analog fil-
ter circuitry. The necessary signal adaption is done by
a saturation stage. This leads to a harsh driven audio
signal.
•
24dB LP
removes frequencies above the cutoff point
with a 24dB slope. The oscillator signal need to be sent
to a DA converter before passing the analog filter cir-
cuitry. The necessary signal adaption is done by a soft
limiter. This leads to a neutral audio signal.
•
24dB sat. LP
removes frequencies above the cutoff
point with a 24dB slope. The oscillator signal need to
be sent to a DA converter before passing the analog fil-
ter circuitry. The necessary signal adaption is done by
a saturation stage. This leads to a light driven audio
signal.
•
24dB dirty LP
removes frequencies above the cutoff
point with a 24dB slope. The oscillator signal need to
be sent to a DA converter before passing the analog fil-
ter circuitry. The necessary signal adaption is done by
a saturation stage. This leads to a harsh driven audio
signal.
Mode
Switches between the available filter modes. Depending on
the selected mode the effect of the Cutoff and Resonance
parameters as well as the behaviour of Filter 1 and 2 dif-
fers. The following modes are available:
•
Single
: only
Cutoff 1
and
Resonance 1
(Filter 1) have
an affect on the sound signal.
Cutoff 2
and
Resonance
2
have no influence here.
Summary of Contents for QUANTUM
Page 1: ...USER MANUAL...
