!
!
October 25
th
2013
www.thonk.co.uk
1
TouellSkouarn
Strakal Brulu Module
Eurorack DIY Kit
Instructions
Version 1.0
OVERVIEW
For the most recent version of this
document please visit
http://www.thonk.co.uk/documents/strakal
For all technical support please visit
http://bit.ly/1h4aVPk
on Muffwiggler.
The Strakal Brulu manual is here
http://www.thonk.co.uk/documents/strakal/
StrakalBrulu_ReGrenvEo.pdf
All Thonk kits are sold under our standard Terms and Conditions -
http://www.thonk.co.uk/faq/
DIY INSTRUCTIONS
This document gives detailed instructions that assume you have purchased a
complete kit from
www.thonk.co.uk
. It also assumes no previous knowledge
of electronics. To learn to solder try
http://youtu.be/I_NU2ruzyc4
and the
Adafruit guide to excellent soldering
– http://
bit.ly/1l77tF4!
Watch and understand that whole YouTube video! If you’re not achieving the
results shown in the video then you need to buy new tools or seek advice.
You will not end up with a working module otherwise.
TOOLS REQUIRED
Soldering iron, snipe nose pliers, wire strippers, small flat head screwdriver
and diagonal cutters AKA snips AKA side-cutters. A Digital Multimeter is
necessary for calibrating this module accurately but you can do it by ear to
taste. Thonk sell a range of inexpensive tools here -
http://bit.ly/1jxqF3n
IF YOUR KIT IS DATED 2016
CLOSE THIS DOCUMENT AND
DOWNLOAD THE V1.3.1 MANUAL
INSTEAD:
thonk.co.uk/documents/strakal/
