!
!
October 25
th
2013
www.thonk.co.uk
9
TouellSkouarn
Strakal Brulu Module
Eurorack DIY Kit
Instructions
Version 1.0
26.
They should now all look like this.
27.
Put the four pots in the positions
shown but
DO NOT SOLDER
yet.
Fuzz – B10K
Feedback – B1M
Input Vol – A50K
Gain Out Volume – B100K
28.
Put the three jacks in the positions
shown but
DO NOT SOLDER
yet.
Note the Fuzz CV jack is rotated 90
degrees compare to in and out jacks.
Put a plastic washer onto each of the
pots.
29.
Now put the panel on and hand
tighten the three jack nuts and four
pot nuts.
NOTE!
– The image shows a
prototype panel without graphics.
Mount your finalised panel with the
graphics the right way up.
Solder all the pots and jacks. Note
that unlike some builds
only the main
three pins
on the pots need
soldering.
