Wacker Neuson 5000620172, Operator'S Manual

Page: 92 / 162

ghi_tx001153gb.fm
92
Maintenance E 1100
†
Remove leaves and twigs from the exhaust compartment.
†
Wipe interior surfaces clean of oil, dust, and dirt.
Cleaning the
exterior Clean the exterior of the machine with clean water and a mild detergent.
7.4 Inspecting the Machine
When Daily
Overview Inspect the machine before each use. A thorough inspection will help to identify
mechanical faults or potentially unsafe operating conditions. Correct these
problems before operating the machine.
External
inspection Perform an external inspection of the machine. Check for:
†
External damage (dents, cracks, broken door latches, etc.)
†
Loose or missing fasteners
†
Loose or missing parts
†
Fluid leaks
†
Restricted air flow in the exhaust compartment
†
Problems with the trailer—refer to topic Maintaining the Trailer
Internal
inspection Open the access doors on both sides of the machine. Check for:
†
Damage to control panel, switches, or customer connections
†
Loose or missing fasteners
†
Loose or missing parts
†
Loose or damaged hoses
†
Fluid leaks
†
Rags, containers, or other debris inside the cabinet
7.5 Inspecting the HTF System and the Fuel System
Requirements
„
Machine shut down
„
Burner cool
HTF System Hoses:
1. Rotate the hose reel brake T-handle counterclockwise to release the brake.
2. Unwind all the hose off the reel. Inspect the hose for leaks and/or damage.
3. Repair any leaks and repair/replace any damaged hoses. See topic Repairing a
Hose .
4. Turn on the machine and rewind the hose onto the reel.
5. Engage the brake by turning the T-handle clockwise.