Wacker Neuson 5000620172, Operator'S Manual

Page: 73 / 162

E 1100 Accessories
wc_tx001844gb.fm
73
5.5 Using Heat Exchangers (to Heat Air)
Background The standard E 1100 can be combined with Wacker Neuson Heat Exchangers
(HX 50 and HX 100) and Single (SPP) and Dual Pump Packs (DPP) to convert the
heating application from surface to air. The typical configurations are shown below;
however, this does not represent all possible configurations. For more information,
contact Wacker Neuson Application Support.
Configuration
requirements In order to connect Heat Exchangers to the machine, additional accessories are
required to support the additional load on the machine’s systems.
NOTICE: Use caution when adding accessories; failure to adhere to these
requirements will damage your machine.
For more information regarding setup and connection of these configurations,
continue reading.
Heat Exchanger Model
Max.
Qty.
Additional components required for maximum
quantity of Heat Exchangers
1-2 Adapter 2-1 Adapter
HX 50 2
-- --
HX 100
1
1 1