Wacker Neuson 5000620172, Operator'S Manual

Page: 6 / 162

Table of Contents E 1100
wc_bo5200003474_02TOC.fm
6
4.14 Connecting Power to the Machine ...................................................... 50
4.15 Powering Up the Machine ................................................................... 51
4.16 Preheating the HTF ............................................................................ 52
4.17 Initiating the HTF Flow ........................................................................ 53
4.18 Unwinding and Positioning the Hoses ................................................ 54
4.19 Hose Spacing Guidelines ................................................................... 55
4.20 Monitoring the Operating Parameters ................................................. 56
4.21 Rewinding the Hoses .......................................................................... 57
4.22 Shutting Down and Packing Up the Machine ..................................... 59
4.23 Quick-Connect Coupling Usage and Care .......................................... 60
4.24 Resetting a Low HTF Fault ................................................................. 61
4.25 Operating States of the Beckett Burner Controller ............................. 63
4.26 Operating at High Elevations .............................................................. 67
5 Accessories 68
5.1 Accessories ........................................................................................ 68
5.2 Expanding the Surface Heating Capacity ........................................... 69
5.3 Expanded Operation using One SPP and One HHS 1101 ................. 71
5.4 Expanded Operation using One DPP and One HHS 2202 ................. 72
5.5 Using Heat Exchangers (to Heat Air) .................................................. 73
5.6 Connecting a HX 100 Heat Exchanger ............................................... 74
5.7 Connecting two HX 50 Heat Exchangers ........................................... 76
6 Burner Setup 78
6.1 Setting/Checking the Electrodes ......................................................... 81
6.2 Checking/Replacing the Burner Nozzle .............................................. 83
6.3 Setting the “Z” Distance ...................................................................... 85
6.4 Adjusting the Air Settings .................................................................... 86
6.5 Setting the Fuel Pressure ................................................................... 87
6.6 Removing the Burner .......................................................................... 88
6.7 Installing the Burner ............................................................................ 89
7 Maintenance 90
7.1 Preparing for Maintenance ................................................................. 90
7.2 Periodic Maintenance Schedule ......................................................... 90
7.3 Cleaning the Machine ......................................................................... 91
7.4 Inspecting the Machine ....................................................................... 92
7.5 Inspecting the HTF System and the Fuel System .............................. 92