Wacker Neuson 5000620172, Operator'S Manual

Page: 109 / 162

wc_tx003152gb.fm
109
E 1100 / HSH 350 Genset Maintenance
8.4 Servicing the Air Cleaner
Requirements
„
Compressed air—maximum 73 psi (5 bar)
„
Engine stopped
„
Engine cooled
Frequency The air cleaner element should be replaced as needed or every 500 hours.
Procedure Perform the procedure below to service the air cleaner.
1. Remove the air cleaner cover (a) .
2. Unscrew and remove knurled nut (b) and take off air cleaner element (c) .
3. Clean the filter compartment and the cover. Dirt and other foreign debris must
not be allowed to enter the engine's air inlet points.
4. The filter element should either be replaced or, depending upon the degree of
contamination, cleaned or checked as indicated below.
Dry Contamination:
„
Use compressed air to blow through the filter element from the inside outwards,
until no further dirt emerges.
NOTICE: The air pressure must not exceed 73 psi (5 bar).
Moist or Oily Contamination:
„
Replace the filter element.
This procedure continues on the next page.
wc_gr009557
a
b
c