Wacker Neuson 5000620172, Operator'S Manual

Page: 77 / 162

E 1100 Accessories
wc_tx001844gb.fm
77
Continued from the previous page.
3. Disconnect the hose on the reel (a) from the HTF supply hose (b) .
4. Connect the 1-2 adapter (c) to the HTF supply hose (b) .
5. Connect the Heat Exchanger supply hoses (d) to the 1-2 adapter (c) .
6. Connect the 2-1 adapter (f) to the accessory HTF return port (g).
7. Connect the Heat Exchanger HTF return hoses (e) to the 2-1 adapter (f) .
8. Insulate the supply and return hoses.
9. Connect the Heat Exchangers to the appropriate electrical source.
NOTICE: Only turn on the pump when the Heat Exchangers are connected.
Turning on the pump when the Heat Exchangers are not connected will cause
excess system pressure which will damage the pump.
10.Start the E 1100 and operate it with the temperature controller set to 80°C.
11.Turn on the Heat Exchangers.
Result The Heat Exchangers have now been connected and are operating.
wc gr008516
HX 50
HX 50
b
c
d
a
e
g
f