Voltech AT360, User Manual

Page: 397 / 470

V
OLTECH
AT
I
U
SER
M
ANUAL
P
AGE
7-99
Xc = 1/ 2
ππππ
fC.
Note that the PC Editor’s ‘Measure’ button CANNOT be used to determine the
test voltage.
Choosing Test Limits
The test limits can be:
% A nominal value together with + and – percentage limits.
>< Minimum and maximum values
> A minimum value only
< A maximum value only
Use the PC Editor’s ‘Measure’ button (together with a sample part) if you are
unsure of the nominal value.
If the "User Offset Enabled" check box is checked, a value can be entered into
the edit box. The value entered is then added to any results returned from the
AT tester.