Voltech AT360, User Manual

Page: 46 / 470

G
ETTING
S
TARTED
P
AGE
2-12 V
OLTECH
AT
I
U
SER
M
ANUAL
2.2.2 Installing the PC Editor
Connect the tester's auxiliary port to a spare COM port on the PC as shown.
The type of connector on the PC will determine the cable that you use. For
most PC’s this will be a 9-pin female (PC) to 9-pin female (ATi).
Switch on the power supply to the PC
Before attempting to install the Editor, check that your PC satisfies the
following hardware requirements:
PC processor
486 or better
Memory
4MB minimum
Hard disk space
2MB minimum
Operating system
Windows 95 or newer
Supported screen resolutions
640 x 480, 800 x 600
1024 x 768, 1280 x 1024
CD-ROM drive
x2 minimum speed
To install the Editor software, place the ATi CD-ROM supplied with your tester
into the CD-ROM drive of the computer and follow the on-screen instructions.
Auxiliary port
COM port