Voltech AT360, User Manual

Page: 466 / 470

W
ARRANTY AND
S
ERVICE
P
AGE
9-6 AT
I
U
SER
M
ANUAL
to ensure optimum performance from its product range.
Because software is inherently complex and may not be completely free of
errors, you are advised to verify your work. In no event will Voltech be liable for
direct, indirect, special, incidental or consequential damages arising out of the
use of, or inability to use, software or documentation, even if advised of the
possibility of such damage. In particular, Voltech is not responsible for any lost
profits or revenue, loss of use of software, loss of data, cost of substitute
software, claims by third parties, or for other similar costs. In no case, shall
Voltech's liability exceed the amount of the license fee
9.3 S
ERVICE AND
C
ALIBRATION
To confirm the accuracy of your AT series tester, a calibration check should be
carried out every 12 months.
Calibration is carried out using a special fixture as described in the next
section. The calibration can be performed by an authorized Voltech service
center or at your own facility, if you have the required equipment
For details of calibration facilities and any other service request, please contact
your Voltech supplier. Voltech strongly recommends that you discuss your
service requirements with your supplier before service is needed. Extended
warranty and full service agreements are available.
9.4 O
BTAINING
S
ERVICE AND
A
PPLICATIONS
S
UPPORT
Voltech personnel will be happy to help you with any query that you may have.
Please telephone, fax or e-mail your local supplier or your regional Voltech
service center, as listed at the front of this manual.
To ensure we provide the fastest possible support, we may ask you for:
•
The serial number of the ATi. (Shown on the back of the instrument.)