Voltech AT360, User Manual

Page: 342 / 470

T
ESTS AND
T
EST
C
ONDITIONS
P
AGE
7-44 V
OLTECH
AT
I
U
SER
M
ANUAL
Programming the Test Using the PC Test Editor
Choose the integration period (normally ‘Medium’) and enter the terminals to
be measured.
Terminals (X) High and Low: Winding 1
Terminals (Y) ‘High’ and ‘Low’: Winding 2
Use the PC Editor’s ‘Measure’ button (together with a sample part) if you are
unsure of how to choose the test conditions.
Choosing the Test Limits
The test limits are a nominal value together with + and – percentage limits.
Use the PC Editor’s ‘Measure’ button (together with a sample part) if you are
unsure of the nominal value.
Test limits should be set as close as possible to detect assembly faults.
If the "User Offset Enabled" check box is checked, a value can be entered into
the edit box. The value entered is then added to any results returned from the
AT tester.