Voltech AT360, User Manual

Page: 55 / 470

G
ETTING
S
TARTED
V
OLTECH
AT
I
U
SER
M
ANUAL
P
AGE
2-21
4. Repeat steps 1-3 to create a second winding. This time place the
winding on the right hand side of the screen, a mirror image of the
first winding, and use different terminal names (e.g. ‘C’ and ‘D’). The
screen should then look like this:
Now you must connect the windings to the test nodes of the tester:
Place the mouse pointer over terminal A; press and hold the
right
mouse
button. Continue holding this mouse button down and drag the mouse
pointer to test node 9. Release the button. A wire will now connect terminal A
to test node 9. Repeat this procedure to connect the other three terminals, B,
C and D to nodes 7, 10 and 8. The screen should now look like this:
You have now created a schematic layout of a four terminal transformer.
RIGHT MOUSE
CLICK TO DRAG
CONNECTIONS