Voltech AT360, User Manual

Page: 66 / 470

G
ETTING
S
TARTED
P
AGE
2-32 V
OLTECH
AT
I
U
SER
M
ANUAL
3 For now, run the program from the editor software and ignore the AT display:
Again, from the top-level menu bar, select:
Tester > Run Program
The test program will now begin execution. When it is finished, you will see
a dialogue box containing the results of the test.
If the transformer had been connected up as in the schematic to nodes 7,
8, 9, and 10 then the results might be:
If no transformer is fitted, the results will have no meaning, but you have now
successfully installed the ATi and the Voltech AT Editor software.
The results window will give you the options to:
1. Print the test results.
2. Re-run the test program.
3. Close the window.
Closing the window will return you to the top-level menu.