Voltech AT360, User Manual

Page: 139 / 470

P
ROGRAM
E
DITOR
V
OLTECH
AT
I
U
SER
M
ANUAL
P
AGE
3-17
When the test program is run on the AT Series
Tester, the operator will be prompted to fit the fixture
with this name. This will help to make sure that the
correct fixture is used.
Note that the fixture name does not have to be the
same as the program (part) name. This makes it
possible to have one fixture common to a number of
transformers, which may, for example, have the
same arrangement of pins, but have different
windings requiring different test programs.
External AC Source
This option is applicable to the AT3600 only.
When you have selected all the required options, click on the OK button to
return to the Top Level menu.
Stop on Fail
With this function enabled, the tester will stop program execution whenever a
fail is detected, rather than carrying out all the tests in the test program and
reporting the passes and fails at the end.
This enables the user to quickly identify a faulty transformer and replace it with
another before all the tests have been carried out, thus speeding up the test
process.
When a fail is encountered, the tester will display a warning screen and stop
the program. The display will inform the user of a test failure, and indicate
which limits have been exceeded.