Voltech AT360, User Manual

Page: 47 / 470

G
ETTING
S
TARTED
V
OLTECH
AT
I
U
SER
M
ANUAL
P
AGE
2-13
1. The set-up program will suggest a directory in which to place the Editor files:
C:\Program Files\Voltech Instruments\Voltech AT Editor
This directory will be created if it does not already exist. If you want to place
the files elsewhere, browse to another directory.
If you have a previous version of the Editor software already installed on your
PC, the procedure outlined above may also be used to install a new version.
None of your program files will be lost. The same Editor program is used for all
AT Series testers (excluding the discontinued AT3500 and AT1000).
PC COM Port Configuration
When the installation of the Editor has been completed, you will see the Editor
icon in the program group ‘Voltech Software’. Double-click with the left mouse
button on the Editor icon to start the program.
Initially, configure the Editor to use the chosen COM port:
1. From the top-level
‘Setup’ menu,
select
‘Communications’.
2. In the dialogue
box shown here,
select he PC
communications
port that is
connected to the
tester.
WARNING: If the chosen ‘COM’ port is reserved by another
Windows application, an error message will appear. You
should select another port.
i