Voltech AT360 User Manual Download

Page: 147 / 470

ROGRAM

DITOR

OLTECH

SER

ANUAL

AGE

3-25

3.3.5 D

ELETING

ESTS

To delete a test from the Program with the Editor software is very simple.

1. In the Program list window, click with the left mouse button to highlight the

test you wish to delete.

NOTE: Take care to correctly select the test to be deleted, as the Editor
software will permanently delete the test.

2. From the top-level menu bar, select:

Program > Delete Test

3. Confirm your selection by clicking ‘Yes’ in the following dialogue box:

You will now see that the test has been removed from the list in the Program
window.

Summary of Contents for AT360























































































































































































































































































































































































































































































Search results

Summary of Contents for AT360

Reviews:

Related manuals for AT360

Brands by name

Popular brands

Voltech AT360, User Manual

Search results

Summary of Contents for AT360

Reviews:

Related manuals for AT360

Brands by name

Popular brands