Voltech AT360, User Manual

Page: 386 / 470

T
ESTS AND
T
EST
C
ONDITIONS
P
AGE
7-88 V
OLTECH
AT
I
U
SER
M
ANUAL
Terminals (X) – the measured voltage VOUT1
Terminals (Y) – the energized terminals for creating a common mode
voltage.
Terminals (Y) – the measured voltage VOUT2
Note that the PC Editor’s ‘Measure’ button CANNOT be used to determine the
test voltage.
Choosing Test Limits
The test limits can be:
% A nominal value together with + and – percentage limits.
>< Minimum and maximum values
> A minimum value only
< A maximum value only
Use the PC Editor’s ‘Measure’ button (together with a sample part) if you are
unsure of the nominal value.
If the "User Offset Enabled" check box is checked, a value can be entered into
the edit box. The value entered is then added to any results returned from the
AT tester.