Voltech AT360, User Manual

Page: 129 / 470

P
ROGRAM
E
DITOR
V
OLTECH
AT
I
U
SER
M
ANUAL
P
AGE
3-7
3.2.1 A
DDING A
T
RANSFORMER
W
INDING
To add a transformer winding onto the screen:
1. Select ‘Add Winding’ from the Schematic menu on the menu bar.
2. Place the winding on the screen:
A selected winding will now be displayed attached to the mouse pointer
on the screen. You must decide which half of the screen to place the
winding. On crossing the mid-point of the screen, the winding is
mirrored to face the nearest test nodes. Click the left mouse button to
place the winding.
3. Name the winding terminals:
2. When the winding is placed, a dialogue box appears prompting you
to name both of the winding’s two terminals.
4. You may move the cursor focus between the fill-in boxes by using the
TAB key or by pointing and clicking with the mouse.
5. When both terminals have been named, you should press ENTER on
the keyboard or click on OK with the mouse in the dialogue box.
6. To make a winding with more than two terminals, see
Adding a terminal
to an Existing Winding
, later in this chapter.
NOTE: Terminal names may be between 1 and 6 characters in
length, and may contain any upper case letter or AT Series
keyboard character excluding SPACE.
i