Voltech AT360, User Manual

Page: 100 / 470

G
ETTING
S
TARTED
P
AGE
2-66 V
OLTECH
AT
I
U
SER
M
ANUAL
If the next serial number to be used simply follows on in sequence after the
previous one, then press the ‘Last + 1’ softkey (or the touch pads). This will
enter the next serial number automatically and return the display to the RUN-
FINISH selection.
Note:
‘Last + 1’ will be displayed only if the serial number is of the form:
xxxAnnnn
Where ‘xxx’ is a field containing any characters, A is a non-numeric character,
and ‘nnnn’ is a field of all numeric characters.
Both ‘xxx’ and ‘nnnn’ can be of any length, provided that the total serial
number is no more than 20 characters.
When ‘nnnn’ is all 9’s (for example 99), the next number will show ‘nnnn’ as all
0’s (for example 00); the characters ‘xxxA’ will not be changed.
Alternatively, if the next serial number does not follow from the previous one in
sequence, you may use the keypad (or the barcode reader) to type in a new
number.
After typing the new number, press the ENTER key, the ENTER softkey or the
footswitch to return to the RUN-FINISH display.