- 50 -
C1453
01000.
fm
Español
Informaciones sobre el mantenimiento
ES
Informaciones sobre el mantenimiento
D700/750 E2-E3
Actuar tal y como se indica a conti-
nuación.
1-
Encender el motor y hacerlo
funcionar en régimen mínimo du-
rante algunos minutos.
El circuito de enfriamiento alcanza
la presión de trabajo.
2-
Apagar el motor y remover la
llave de arranque.
3-
Dejar enfriar el motor de modo
adecuado para evitar riesgos de
quemaduras.
4-
Predisponer un recipiente que
tenga capacidad adecuada.
Consultar "Datos técnicos" para
determinar la cantidad de fluido.
5-
Destornillar el tapón de llenado
(P)
Precaución - advertenc
Abrir lentamente el tapón para
purgar la presión.
6-
Abrir el grifo
(S)
.
Importante
– Si no es posible eliminar el líquido re-
frigerante a través de una llave de paso,
controlar si existe un tapón de vaciado o
aflojar un manguito del circuito de refri-
geración en la parte inferior del radiador.
– Para más información consultar la do-
cumentación suministrada por el fabri-
cante del vehículo/dispositivo donde
está instalado el motor.
7-
Dejar fluir el fluido en el recipiente.
8-
Cerrar el grifo
(S)
.
9-
Verter el fluido nuevo.
Importante
– El nivel de líquido debe estar en la
base del cuello donde se atornilla el ta-
pón del radiador.
– Si hay un depósito de expansión del lí-
quido refrigerante, consultar la docu-
mentación suministrada por el
fabricante del vehículo/dispositivo don-
de está instalado el motor.
– Consultar "Datos técnicos" para de-
terminar las cantidades y tipos.
10-
Volver a atornillar el tapón
(P)
.
CAMBIO DEL REFRIGERANTE
IDM-45300901500.tif
Tapón de llenado
(P)
Llave de paso
(S)