Vinyl Express Q100 User Manual Download

Page: 93 / 180

ADVANCED FUNCTIONS AND OPERATIONS : Enlarging or Reducing an Image

6-15

6.9 Enlarging or Reducing an Image

This function sets the SCALE factor for enlarging or reducing an image to be cut or
plotted.

ETTING

ROCEDURE

Press the

MENU

key.

Press the

NEXT

key until the following menu appears.

Press the

key (FUNCTION 1). The following menu appears.

Press the

key (SCALE). The following menu appears.

Use the (

▲▼

)

POSITION

keys to select the desired scale factor within the

range of 1/8, 1/4, 1/2, 1, 2, 3, 4, 5, 6, 7, and 8.

Press the

ENTER

key to register your setting.

Press the

MENU

key to return the plotter to Ready status.

This setting is retained in the plotter’s internal memory even when the power is
turned off.

INTERFACE>

AREA PARAMETERS>

FUNCTION 1>
FUNCTION 2>

PREF. LINE TYPE>

ROTATE>
MIRROR>

SCALE>

SCALE

SCALE FACTOR =

Summary of Contents for Q100





















































































































































































Search results

Summary of Contents for Q100

Reviews:

Related manuals for Q100

Brands by name

Popular brands

Vinyl Express Q100, User Manual

Search results

Summary of Contents for Q100

Reviews:

Related manuals for Q100

Brands by name

Popular brands