Vinyl Express Q100 User Manual Download

Page: 154 / 180

BACK GROUND SETTINGS: Setting the Background Settings

8-6

At the LANGUAGE SELECTION menu, use the (

▲▼

)

POSITION

keys to select

the desired language and then press the

ENTER

key.

At the CROSS CUT PRESSURE menu, use the (

▲▼

)

POSITION

keys to

increase or decrease the value and then press the

ENTER

key.

For all other displays, press the

or the

key to move the asterisk to your

desired choice, and then press the

ENTER

key. The asterisk indicates the

currently selected setting. If you do not wish to change the currently displayed
setting, press the

NEXT

key to move to the next menu.

Turn off the power off when all the settings are completed.

These settings are retained in the plotter’s memory even when the power is
turned off.

Summary of Contents for Q100





















































































































































































Search results

Summary of Contents for Q100

Reviews:

Related manuals for Q100

Brands by name

Popular brands

Vinyl Express Q100, User Manual

Search results

Summary of Contents for Q100

Reviews:

Related manuals for Q100

Brands by name

Popular brands