Vinyl Express Q100 User Manual Download

Page: 69 / 180

BASIC FUNCTIONS AND OPERATIONS: Moving the Origin Point

5-5

5.5 Moving the Origin Point

This function allows you to move the origin point to any desired position.

For the front loading model, rotate the above figure 180 degrees.

ETTING

ROCEDURE

With the plotter in Ready status, use the

POSITION

keys to move the pen car-

riage to the new origin point.

Press the

ORIGIN

key. The beeper sounds, the LCD displays the “NEW

ORIGIN POINT SET” message for several seconds, and the new origin point is
set.

When the origin is moved after the coordinate axes were rotated

Moving the origin after the coordinate axes were rotated gives the following
results.

For the front loading model, rotate the above figure 180 degrees.

New origin point

Original origin point

New origin point

Original origin point

Summary of Contents for Q100





















































































































































































Search results

Summary of Contents for Q100

Reviews:

Related manuals for Q100

Brands by name

Popular brands

Vinyl Express Q100, User Manual

Search results

Summary of Contents for Q100

Reviews:

Related manuals for Q100

Brands by name

Popular brands