Viking MI 632, Instruction Manual

Page: 157 / 428

155
DE
FR
NL
IT
EN
0478 131 9931 B - EN
Message:
2000 – Signal problem
Dock iMow
Possible cause:
– Wire signal faulty, fine tuning necessary
Remedy:
– Place the robotic mower in the docking
station – then press OK
Message:
2010 – Replace mowing blade
Allowed operating time reached
Possible cause:
– Mowing blade has been in use for more
than 200 hours, replacement is
necessary
Remedy:
– Replace the mowing blade, then
confirm the blade replacement in the
"Service" menu (
Ö
16.4)
Message:
2020 – Recommendation
Annual service by spec. dealer required
Possible cause:
– Machine service recommended
Remedy:
– Have the annual service carried out by
a VIKING specialist dealer
Message:
2030 – Battery
Allowed operating time reached
Possible cause:
– Battery replacement necessary
Remedy:
– Have the battery replaced by a VIKING
specialist dealer
Message:
2032 – Battery fault during charging
see message 0701
Message:
2040 – Battery fault when starting mowing
see message 0701
Message:
2050 – Adapt mowing plan
Extend active times
Possible cause:
– Active times have been
shortened/deleted or the mowing
duration has been extended – the
stored active times are insufficient for
the necessary mowing operations.
Remedy:
– Extend the active times ( Ö 11.7) or
shorten the mowing duration (
Ö
11.8)
Message:
2060 – Mowing completed
Press OK to release
Possible cause:
– Mowing in secondary area successfully
completed
Remedy:
– Return the robotic mower to the mowing
area and dock to charge the battery
(
Ö 15.7)
Message:
2070 – GPS signal
No reception at edge
Possible cause:
– The entire edge of the mowing area is in
a dead spot
Remedy:
– Repeat edge following ( Ö 11.14)
– Contact a VIKING specialist dealer for a
detailed diagnosis
Message:
2071 – GPS signal
No reception at starting pt. 1
Possible cause:
– Starting point 1 is in a dead spot
Remedy:
– Change the position of starting point 1
( Ö 11.15)
Message:
2072 – GPS signal
No reception at starting pt. 2
Possible cause:
– Starting point 2 is in a dead spot
Remedy:
– Change the position of starting point 2
( Ö 11.15)
Message:
2073 – GPS signal
No reception at starting pt. 3
Possible cause:
– Starting point 3 is in a dead spot
Remedy:
– Change the position of starting point 3
( Ö 11.15)