Viking MI 632, Instruction Manual

Page: 141 / 428

139
DE
FR
NL
IT
EN
0478 131 9931 B - EN
15.2 Removing and installing the
control panel
The control panel can be removed from
the robotic mower as required in order to
perform manual mowing or to e.g. change
the programming.
Automatic operation of the robotic mower
is only possible when the control panel is
inserted.
Removing the control panel:
● In running operation, press the
STOP button before removing the
control panel.
Lift the rear of the control panel (1) with a
slight tug and remove it from the robotic
mower. It remains connected to the
machine via a spiral cable.
Inserting the control panel:
Stow the spiral cable (1) in the housing
compartment. Tilt the control panel
backwards slightly, insert the retainers (2)
in the recesses in the housing (3), then
press down the control panel at the front
and allow to engage.
15.3 Adapting the programming
Current programmes can be seen in the
mowing plan or, in the case of the models
MI 632 C, MI 632 PC, in the VIKING iMow
app . ( Ö 11.6)
The mowing plan is calculated based on
the size of the mowing area during
installation or during the creation of a new
mowing plan.
The active times and the mowing
duration can be changed individually, the
required mowing operations themselves
are automatically distributed over the
possible active times. If required, several
mowing or charging operations can run
during an active time. If required, the edge
of the mowing area can be cut
automatically at regular intervals.
(
Ö 11.14)
Up to three different active times per day
are possible. (
Ö 11.6)
If the robotic mower has to travel to
specific areas of the mowing area, starting
points must be defined. (
Ö 11.15)
Changing the active times : ( Ö 11.7)
– Additional active times for further
mowing operations.
– Adapting the time window in order, for
example, to prevent mowing during the
morning or night.
– Omitting individual active times
because the mowing area is e.g. being
used for a party.
Extending the mowing duration : ( Ö 11.8)
– There are areas which are not mown
sufficiently, e.g because the mowing
area has lots of corners.
– Intensive grass growth during the
growing period.
– Particularly dense lawn.
Under certain circumstances (e.g.
warm weather or generous time
window), not all the active times
may be necessary for optimal lawn
care.