Viking MI 632, Instruction Manual

Page: 154 / 428

0478 131 9931 B - EN
152
Message:
0001 – Data loss
Press OK to release
Possible cause:
– The machine software has been
updated
– Voltage loss
– Software or hardware error
Remedy:
– After the OK button is pressed, the
robotic mower operates with the default
settings – check and correct the
settings (date, time, mowing plan)
Message:
0100 – Battery discharged
Charge battery
Possible cause:
– Battery voltage too low
Remedy:
– Place the robotic mower in the docking
station to recharge the battery ( Ö 15.8)
Message:
0180 – Temperature low
Temperature range not reached
Possible cause:
– Temperature inside the robotic mower
too low
Remedy:
– Warm up the robotic mower
Message:
0181 – Temperature high
Temperature range exceeded
Possible cause:
– Temperature inside the robotic mower
too high
Remedy:
– Allow the robotic mower to cool down
Message:
0183 – Temperature high
see message 0181
Message:
0185 – Temperature high
see message 0181
Message:
0186 – Temperature low
see message 0180
Message:
0187 – Temperature high
see message 0181
Message:
0302 – Drive motor fault
Temperature range exceeded
Possible cause:
– Temperature in left drive motor too high
Remedy:
– Allow the robotic mower to cool down
Message:
0305 – Drive motor fault
Left wheel is stuck
Possible cause:
– Overload at left drive wheel
Remedy:
– Clean the robotic mower ( Ö 16.2)
– Level out any uneven areas (holes,
depressions) in the mowing area
Message:
0402 – Drive motor fault
Temperature range exceeded
Possible cause:
– Temperature in right drive motor too
high
Remedy:
– Allow the robotic mower to cool down
Message:
0405 – Drive motor fault
Right wheel is stuck
Possible cause:
– Overload at right drive wheel
Remedy:
– Clean the robotic mower ( Ö 16.2)
– Level out any uneven areas (holes,
depressions) in the mowing area
Message:
0502 – Mowing motor fault
Temperature range exceeded
Possible cause:
– Temperature in mowing motor too high
Remedy:
– Allow the robotic mower to cool down