Viking MI 632, Instruction Manual

Page: 111 / 428

109
DE
FR
NL
IT
EN
0478 131 9931 B - EN
Then press the OK button on the
control panel.
9.6 Routing the perimeter wire
Fasten the perimeter wire (1) to the ground
on the
left A or right B as appropriate,
next to the floor plate, directly next to a
wire outlet, using a fixing pin (2).
Provide a free wire end (1) with a length of
approx. 1 m.
Internal docking station:
Route the perimeter wire (2) in front of and
behind the docking station (1) for
0.6 m in
a straight line and at right angles to the
floor plate. Then follow the edge of the
mowing area with the perimeter wire.
If the battery is discharged, a
plug symbol appears instead
of the battery symbol at the
top right corner of the display after
docking and the battery is charged
while the perimeter wire is being
routed. (
Ö 15.8)
Please read and observe the entire
"Perimeter wire" section before
performing wire routing. (
Ö
12.)
In particular, plan the routing,
observe the wire clearances and
install no-go areas , reserve wire ,
linking sections , secondary
areas and corridors during wire
routing.
If the staggered drive home
(corridor) is used, the perimeter
wire must be routed at least
1.5 m
in front of and behind the docking
station in a straight line and at right
angles to the floor plate. (
Ö 11.14)