Viking MI 632, Instruction Manual

Page: 106 / 428

0478 131 9931 B - EN
104
9.1 Notes on initial installation
An installation assistant is
available for installation of the
robotic mower. This program
guides you through the entire
initial installation process:
● Setting the language, date and time
● Installing the docking station
● Routing the perimeter wire
● Connecting the perimeter wire
● Linking the robotic mower and docking
station
● Checking installation
● Programming the robotic mower
● Completing initial installation
The installation assistant must be worked
through in its entirety. Only then is the
robotic mower ready for operation.
Preparatory measures:
● Mow the lawn using a conventional
lawn mower prior to initial installation
(ideal grass height of 3 to 4 cm).
● In the case of a hard and dry surface,
water the mowing area lightly in order to
make it easier to drive in the fixing pins.
● MI 632 C, MI 632 PC:
The robotic mower must be activated by
a VIKING specialist dealer and
associated with the owner's e-mail
address. (
Ö 10.)
9.2 Installing the battery
● Set the lowest cutting height (level 1).
(
Ö 9.3)
● Place the robotic mower on its back on
a suitable surface.
Insert the battery (C) as illustrated and
allow it to engage.
9. Initial installation
An installation video is available
at the www.viking-garden.com
homepage.
Your VIKING specialist dealer can
provide you with further information
on installing the robotic mower.
The installation assistant is re-
activated following a reset (reset to
factory defaults). (
Ö 11.17)
When navigating through the
menus, follow the instructions in the
section entitled "Operating
instructions". (
Ö 11.1)
You can select options, menu items
and buttons using the
control pad .
You can open submenus and
confirm selections using the
OK button .
Use the Back button to
leave the active menu or
jump one step back in the
installation assistant.
If errors or faults occur during the
initial installation, a corresponding
message appears in the display.
(
Ö 24.)
Lithium-ion batteries must be
treated with particular care. VIKING
recommends that you have the
battery installed by a VIKING
specialist dealer. A defective
battery must only be replaced by a
VIKING specialist dealer.
The battery remains permanently
installed in the robotic mower,
removal is only necessary prior to
disposal of the machine. (
Ö 20.1)