Viking MI 632, Instruction Manual

Page: 126 / 428

0478 131 9931 B - EN
124
11.9 Information
1. Messages:
List of all active errors, faults and
recommendations; shown together
with the times of occurrence.
During trouble-free operation, the text "No
messages" appears.
The message details are displayed by
pressing the OK button. (
Ö 24.)
2. Events:
List of the last activities of the robotic
mower.
Details of the events (additional text, time
and code) can be displayed by pressing
the OK button.
3. iMow status:
Information on the robotic
mower
– Charge state:
Battery charge in percent
– Rem. time:
The remaining mowing duration during
the current week in hours and minutes
– Time and date
– Start time:
Start of the next planned mowing
operation
– Total number of completed mowing
operations
– Mowing hours:
Duration of all completed mowing
operations in hours
– Distance:
Total distance covered in metres
– Ser.-No.:
Serial number of the robotic mower.
This is also to be found on the
identification plate in the compartment
beneath the control panel.
– Battery:
Serial number of the battery
– Software:
Installed machine software
4. Lawn status:
Information on the lawn
– Mowing area in square metres:
This value is entered during initial
installation or new installation (
Ö 9.4)
– Round time:
Duration of one circuit around the
mowing area in minutes and seconds
– Starting points 1 – 4:
Distance of the relevant starting point
from the docking station in meters,
measured in a clockwise direction
(
Ö 11.14)
– Circumference:
Circumference of the mowing area in
metres
– Edge mowing:
Frequency of edge mowing per week
(
Ö 11.14)
5. Radio module status
(MI 632 C, MI 632 PC):
Information on the radio module
– Satellites:
Number of satellites within range
– Position:
Current position of the robotic mower;
available if the satellite connection is
strong enough
– GPRS:
Signal strength of the mobile radio
connection; the more plus characters
shown (max. "++++"), the better the
connection
– Network:
Network ID, comprising country code
(MCC) and provider code (MNC)
– Mobile phone number:
Mobile phone number of the owner; is
entered in the app (
Ö 10.)
– IMEI:
Hardware number of the radio module
– IMSI:
International mobile subscriber identity
– Contr. until:
Expiry date of the current M2M service
contract
– SW:
Software version of the radio module
– Ser.-No.:
Serial number of the radio module
If certain activities occur too
frequently, your VIKING specialist
dealer will have further details.
Errors during normal operation are
documented in the messages.