Viking MI 632, Instruction Manual

Page: 122 / 428

0478 131 9931 B - EN
120
screen together with the symbol shown,
the automatic mowing status (
Ö 11.5) and
information on GPS protection ( Ö 11.16).
Status information during running
activities – all models:
The text "iMow mowing lawn" and a
corresponding symbol are shown on
the display during a running
mowing operation . The text and symbol
are adapted to the respective active
operation.
The text "Attention – iMow starting" and a
warning symbol are displayed
before the
mowing operation .
Edge mowing :
While the robotic mower mows the
edges of the mowing area, the text
"Mowing edge" is displayed.
Drive to docking station :
When the robotic mower returns to
the docking station, the relevant
reason is indicated in the display (e.g.
Battery discharged, Mowing completed).
Battery charging :
The text "Charging battery" appears
during charging of the battery.
Message screen – all models:
Errors, faults or recommendations are
displayed together with warning symbol,
date, time and message code. If several
messages are active, they appear
alternately. (
Ö 24.)
11.3 Information area
The following information is shown in the
top right corner of the display:
1. Charge state of the battery or charging
in progress
2. Automatic mowing status
3. Time
4. Mobile radio signal (MI 632 C,
MI 632 PC)
1. Charge state:
The battery symbol serves to
indicate the charge state.
No bars – battery discharged
1 to 5 bars – battery partially
discharged
6 bars – battery fully charged
During charging, the mains plug
symbol is shown instead of the
battery symbol.
2. Automatic mowing status:
When automatic mowing is switched
on, the
Automatic symbol appears.
Flashing of the display illumination
and a signal tone additionally
indicate the impending start of the
mowing motor. The mowing blade
is only activated a few seconds
after the robotic mower has been
set into motion.
The message and status
information appear alternatively if
the robotic mower is ready for
operation.