Viking MI 632, Instruction Manual

Page: 149 / 428

147
DE
FR
NL
IT
EN
0478 131 9931 B - EN
Install the blue cable (BL) and the brown
cable (BR) in the plug as illustrated.
Tighten screws (1).
16.9 Storage and winter break
Note the following points when storing the
robotic mower for long periods (e.g. winter
break):
● Charge the battery. (
Ö
15.8)
● Switch off automatic mowing. ( Ö 11.5)
● Activate the highest safety level (anti-
theft alarm). (
Ö 11.16)
● MI 632 C, MI 632 PC:
Activate ECO energy mode. (
Ö
11.11)
● Activate disabling device. ( Ö 5.2)
● Disconnect the power supply unit plug
from the mains.
● Remove the docking station cover.
(
Ö 9.5)
Disconnect the perimeter wire (1). Open
the cover of the cable duct (2) and guide
the perimeter wire together with the press-
fit connectors out of the docking station
socket.
● Disconnect the power cable from the
docking station.
● Install the docking station cover.
(
Ö
9.5)
● Remove the docking station.
● Protect the terminals (connectors) of
the perimeter wire from environmental
influences (e.g. wrap with suitable
insulating tape).
● Carefully clean all external parts of the
robotic mower and the docking station.
● Store the robotic mower together with
the docking station and the power
supply unit in the normal position and in
a dry and locked place that is generally
free of dust. Dock the robotic mower in
the docking station. Make sure that the
machine is kept out of the reach of
children.
● Always store the robotic mower in good
operational condition.
● Keep all screws tightly fastened,
replace danger signs and warnings on
the machine that have become illegible,
check the entire machine for wear and
damage. Replace all worn or damaged
parts.
● Any machine faults must be completely
remedied prior to storage.
Resuming operation of the robotic mower
following prolonged immobilisation:
● Prepare the mowing area:
Remove foreign objects and cut high
grass short using a conventional lawn
mower.
● Install the docking station ( Ö 9.5) and
connect the perimeter wire. ( Ö 9.7)
● Charge the battery ( Ö 15.8)
● Check the time and date and set if
necessary (
Ö 11.11)
Risk of injury!
Disconnect the mains plug and
unplug the power supply unit from
the docking station before
performing any work on the power
supply unit.
Read the instructions in the section
"Warning – dangers caused by
electrical current". (
Ö 6.3)
Do not remove the press-fit
connectors from the perimeter wire;
they are intended for one-time use.
Additional press-fit connectors are
available from a VIKING specialist
dealer. (
Ö 17.)
Do not remove the perimeter wire
from the mowing area.
Never place or store objects on the
robotic mower or on the docking
station.