Vicon RV 4116, Operation And Maintenance Manual

Page: 96 / 192

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ Pick-up unit (wide type)
4
83-007-0.
fm
ID
M
English
- 90 -
Part 4
HOW TO ADJUST THE HEIGHT OF THE PICK-UP UNIT
73
The height of the pick-up unit must be adjusted according to the product
to be picked up and to the conformation of the windrow.
During the pick-up operations, the tines of the pick-up unit have not to
knock against the ground.
To perform the adjustment, follow
the instructions.
1. Make sure tractor PTO is dis-
engaged.
2. Lift the pick-up unit in such a
way as to detach the wheels
from the ground.
3. Stop the engine, apply the
parking brake and disengage
the ignition key.
4. Fasten the pick-up unit by us-
ing the specific chain.
5. Remove the safety pin (A) .
6. Disconnect the safety plate
(B) .
7. Slightly extract the wheel-hold-
er arm (C) , and then rotate it to
obtain the desired height.
8. Re-introduce the arm into the
new hole.
9. Reintroduce the safety plate (B) .
10. Place the safety pin (A) .
11. Repeat the same operation on the other side and make sure to use
the same hole.
HOW TO ADJUST THE FIXED BAFFLE PLATE
74
Follow the instructions.
1. Make sure tractor PTO is dis-
engaged.
2. Stop the engine, apply the
parking brake and disengage
the ignition key.
3. Unscrew the nuts (A) .
4. Modify the position of the hitch
pins (B) to adjust the baffle
plate in the desired position.
Important
For optimal adjustment, insert
the pins into the holes.
5. Re-screw the nuts (A) .
6. Repeat the same operation on
the other side and make sure to
use the same holes.
ID
M
-4
8
3
0
0
7
0
0
4
0
0
.p
d
f
C
B
A
ID
M
-4
8
3
0
0
7
0
11
0
0
.p
d
f
B
A C