Vicon RV 4116, Operation And Maintenance Manual

Page: 74 / 192

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ General information about the machine
4
83-004-0.
fm
ID
M
English
- 68 -
Part 2
OIL SUPPLY FOR CENTRALISED LUBRICATION
56
Follow the instructions.
1. Make sure tractor PTO is dis-
engaged.
2. Stop the engine, apply the
parking brake and disengage
the ignition key.
3. Open the cover (A) .
4. Thoroughly clean the area so
that no dust or residues can en-
ter the tank.
5. Unscrew the filling cap (B) .
6. Check the conditions of the fil-
ter (C) and carefully clean it in
case of clogging.
7. Pour new oil into the tank.
8. Tighten the filling cap
(B) .
9. Close the cover (A) .
Caution
Precaution
Use oils whose features are sim-
ilar to the ones that are specified
in the "Lubricant table".
HOW TO CLEAN THE BELT GUIDING ROLLERS
57
Follow the instructions.
1. Make sure tractor PTO is dis-
engaged.
2. Stop the machine; the engine of
the tractor must be on and the
parking brake must be applied.
3. Open the cover (A) .
4. Place the lever of the hydraulic
control valve in the tractor in
position
1 to fully open the tail
gate.
5. Remove the safety pin (B) from
the hole (C1) of the pin (C) ,
push the pin inside and intro-
duce the safety pin
(B) into
hole (C2) .
Important
In order to prevent pin (C) from
breaking, it can be introduced
only after the tail gate is com-
pletely open.
C
B
A
ID
M
-21722104
200
p
df
1
2
3
ID
M
-21722901400.
pdf
B
C
D
D
A
C1 C1
C2