Vicon RV 4116, Operation And Maintenance Manual

Page: 54 / 192

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ General information about the machine
4
83-004-0.
fm
ID
M
English
- 48 -
Part 2
Cardan shaft connection
1. Make sure tractor PTO is disengaged.
2. Check that the connection of the cardan shaft and of the tractor PTO
are undamaged. Clean them in a thorough way, and then lubricate
them with grease.
3. Connect the cardan shaft to the tractor PTO.
Danger
Warning
The cardan shaft must be connected first to machine PTO, and then
to tractor PTO. This allows preventing a lethal "whiplash" in case of
tractor PTO unexpected start.
The constant-velocity joint of the cardan shaft must direct towards
tractor PTO.
4. Connect the safety chains of the protections: one to a component of
the machine and the other to a component of the tractor.
How to connect the oil-pressure
system
1. Thoroughly clean the quick
couplings.
2. Connect the hoses (A-B) to the
couplings of the double acting
control valve in the tractor.
The hoses (A-B) connect the
tail gate opening/closing hy-
draulic system and the bale
density hydraulic system.
3. Connect the hose (C) to the
couplings of the single acting
control valve in the tractor.
The tube (C) connects the hy-
draulic system of the pick-up/
feeding devices.
Important
Use only original quick couplings that assure a correct connection.
Do not use "push-pull" type quick couplings.
How to connect the electric sys-
tem
1. Connect the cable (E) that
feeds electricity to the warning
devices.
2. Connect the cable (F) that
feeds electricity to the binders.
Important
If the tractor is not equipped with
an electric socket for the binders,
an expert operator will have to in-
stall the socket that is supplied in
the standard equipment. The
socket must be protected by
means of a 20 A fuse.
When connecting the feeding sys-
tems, prevent the cables and/or
the hoses from being twisted.
The terminal boards (+ and -) of
the 3-pole socket must be directly connected to pole (+) of the battery,
through a cable of at least 5 mm² section.
ID
M-21
7
22901000.
pdf
A
B
C
ID
M-
21722102000.
pdf
E
F