Vicon RV 4116, Operation And Maintenance Manual

Page: 93 / 192

4
83-007-0.
fm
ID
M
- 87 -
English Part 4
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ Pick-up unit (wide type)
GENERAL DESCRIPTION
68
The pick-up unit picks the product in the windrow and conveys it into the ma-
chine feeding area.
The functions of the unit parts are activated by the main motor drive of the ma-
chine where it is installed.
The pick-up unit is equipped with a safety bolt , which, in case of product
clogging, gets sheared to prevent damages to units or parts of the ma-
chine.
If it is necessary to replace the safety bolt, use an original spare part.
–
"Reel" device (A) : it makes the product pick-up operation easier, and is
equipped with two cams that guide the tine-holder rods.
–
Baffle plate (B) : it allows a more regular feeding of the product, even in
case of short and chopped products.
The baffle plate can be fixed or tilting.
In the machines equipped with balancing baffle plate and rotor or cutting
device roller
(B1) is also installed, which further improves the feeding of
the product.
–
Auger (C) : there are two augers (one on each side), which convey and
adapt the product to the width of the baling chamber.
–
Wheel (D) : there are two wheels (one on each side) and, thanks to a shock
absorber system (E) , they allow the pick-up unit to adapt itself to the dif-
ferent conformations of the ground.
Baffle plat (B)
"Reel" device (A)
Roller (B1)
Wheel (D)
Spiral conveyor
(C)
Spiral conveyor
(C)
Wheel (D)
Suspension device (E)
ID
M
4830070010
0
df
Fixed baffle plate
Baffle plat (B)
Tilting baffle plate