Vicon RV 4116, Operation And Maintenance Manual

Page: 182 / 192

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ Electronic control system
4
83-011-0.
fm
ID
M
English
- 16 -
Icon: to activate and programme the interval
between two cleaning cycles of the machine.
Icon: to programme the display time of the
"stop" signal on display , at the beginning of the
binding cycle.
Icon: to programme the maximum difference
between the diameters at the bale sides.
Icon: to programme the correction factor of the
bale diameter (only for machine with variable
chamber).
Icon: to activate or deactivate the acoustic sig-
nal during the tail gate opening.
Icon: to activate or deactivate the acoustic sig-
nal during the tail gate closing.
Icon: to activate or deactivate the acoustic sig-
nal when reaching 90% of bale pressing.
Icon: to activate or deactivate the acoustic sig-
nal when starting the binding cycle.
PARAMETER PROGRAMMING
13
Follow the instructions.
1. Check the desired screen pages (one at a
time), on which programming or value
change shall be carried out.
2. Press buttons (G) to select the values of
operating parameters.
3. Press buttons (F) to change the parameter
value.
The value of parameter begins to blink.
4. Press button (H) to confirm the operation
or press button (L) to cancel it.
The value of parameter stops blinking and
the cursor reaches the next programming
area.
5. Repeat the operations described in points
2÷4 until all parameters on the screen
page are programmed.
P
M
L
N
G
H
F
F