Vicon RV 4116, Operation And Maintenance Manual

Page: 64 / 192

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ General information about the machine
4
83-004-0.
fm
ID
M
English
- 58 -
Part 2
HOW TO ADJUST BELT ALIGNMENT
47
Follow the instructions.
Check that a finished bale is to be found inside the machine.
1. Make sure the tail gate is closed in a complete and correct way.
2. Make sure tractor PTO is disengaged.
3. Stop the engine, apply the parking brake and disengage the ignition
key.
4. Check the direction (right or left) in which the belts have moved.
During bale creation, the belts could move laterally towards the cor-
responding divisions, and thus wear them out to an excessive extent.
Caution
Precaution
During design and manufacturing, no measure was adopted to al-
low the operator to access the upper areas of the machine. If it be-
comes necessary to access the upper areas, prearrange suitable
safety measures to prevent dangers, especially the danger of fall
from height.
Belts that are moved to the right
side.
1. On the right side of the ma-
chine, loosen the screws (A)
and lower the roller (Q1) by us-
ing the adjustment screw (B) .
As an alternative, you can per-
form a different operation.
On the left side of the machine,
loosen the screws
(A) and lift
the roller (Q1) by using the ad-
justment screw (B) .
Q1
A
B
A
B
IDM-21722103300.pdf