Vicon RV 4116, Operation And Maintenance Manual

Page: 130 / 192

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ Twine binder unit (electronic)
2
1
7
-2
0
9
-3
.f
m
ID
M
English
- 124 -
Part 7
HOW TO REPLACE THE BLADE
108
Follow the instructions.
1. Make sure tractor PTO is dis-
engaged.
2. Stop the engine, apply the
parking brake and disengage
the ignition key.
Caution
Precaution
Wear protection gloves in order
to avoid the risk of cutting your
hands.
3. Open guards (A-B) .
4. Unscrew the nut (C) , remove
the hitch pin (D) and open the
twine case (E) (Perform the op-
eration only with front twine
box).
Important
Before disassembling the sup-
port (G) of the blade, mark the
area that enters into contact
with the structure of the cutting
arm, in such a way as to identify
the position and the correct
coupling during the re-assem-
bly operations.
5. Unscrew the screws (F) to re-
move the support (G) .
6. Unscrew the screws (H) to dis-
assemble the worn blade (L) .
7. Assemble the new blade and
fasten it with the screws (H)
(comply with the dimension
that is specified in the picture).
8. Assemble the support (G)
again in the previous position,
and then fasten it using the
specific screws.
9. Close the twine case (E) , intro-
duce the hitch pin (D) , and then
screw the nut (C) (Perform the
operation only with front twine
box).
10. Close guards (A-B) .
ID
M
-2
1
7
2
0
9
0
1
3
0
2
.p
d
f
C
D
E
B
G
F
A
L
3-4mm
ID
M
-2
1
7
2
0
9
0
1
4
0
2
.p
d
f
L
H