Vicon RV 4116, Operation And Maintenance Manual

Page: 116 / 192

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ Net binder unit (electronic)
2
1
7
-2
0
8
-1
.f
m
ID
M
English
- 110 -
Part 6
ELECTRICAL DEVICES
94
–
Electro-clutch (A) : it drives the
rubber roller to draw the net into
the baling chamber.
ID
M
-2
1
7
2
0
8
0
0
2
0
1
.p
d
f
S1
S4
A
–
Sensor (S1) : by means of the
cam , it detects the quantity of un-
rolled net and, after the binding
cycle has begun (net taken from
the bale), it will stop the electro-
clutch
(A) .
–
Sensor (S4) : it detects the end of
the binding cycle.
NET REEL SUPPLY
95
Follow the instructions.
ID
M
2
1
7
2
0
8
0
0
3
0
1
.p
d
f
C
D1
D
E
F
F
F1
B
A
1. Make sure tractor PTO is dis-
engaged.
2. Stop the engine, apply the
parking brake and disengage
the ignition key.
3. Open guards (A-B) .
4. Lift the braking device (C) until
it locks.
5. Remove split pin (D1) and re-
move pin (D) .
6. Rotate the reel support (E) and
disengage the knob (F1) from
the reel support (E) to remove
the catch (F) .
7. Replace the reel.
8. Remove the catch
(F) and in-
sert the knob (F1) .
9. Position the support (E) with
the new reel.
10. Reintroduce pin (D) and split pin (D1) .
11. Check that the reel is centred with respect to the baling chamber and, if necessary,
adjust its position.
To centre to reel , disengage the knobs (F1) from the catches (F) , manually move
the reel and re-insert the knobs (F1) to block the catches (F) .
Important
To make sure that the net unwinds in a correct way, check that the carton core
of the reel is in good conditions (without damages and/or wet areas).